Tuthill Competitor Plus™

Performance Specifications:

• Flow range: from 6 - 2300 CFM (10-3900 m3/hr)
• Pressure range: up to 15 PSIG (1.03 bar g)
• Vacuum range: up to 16" Hg (540 mbar g)

Material Specifications:

• Housing: Cast iron
• End Plates: Cast iron
• End Cover: Cast iron
• Rotors: Ductile iron
• Shafts: Ductile iron, cast integrally with rotors
• Drive Shaft: Ductile iron, cast integrally with drive rotor
• Gears: Heat treated alloy steel, helical cut
• Seals: Lip seals on rotor shafts and drive shaft
• Lubrication: Oil splash on gear end, grease on drive end
• Bearings:
  • Gear end: Double row ball, both rotors
  • Drive End: Cylindrical roller on drive rotor, Single row ball on driven rotor

Helical Gearing		Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.
Double Row Ball Bearings		For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.
Rotors with Integral Shafts		COMPETITOR PLUS™ blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.
Positive End Clearances		Eliminates the risk of shifting end clearances when installing or removing drive components.
Polished Sealing Surfaces		All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.
Individually Tested		Every COMPETITOR PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.

• Carpet Cleaning
• Dairy Milking
• Mosquito Fogging
• Wastewater Aeration
• Trenchless Drilling
• Air Sparging
• Compost Aeration
• Dust Collection
• Vacuum Cleaning

The COMPETITOR PLUS™ has been engineered and designed to fit right into your existing process without any modification, and at a lower cost than Roots, Sutorbilt, or Gardner Denver.

Competitor Plus Roots Model Sutorbilt Model Port Connection Blower Weight 2002 22 URAI 2M 1" NPT 41 lbs 2004 24 URAI 2L 2" NPT 53 lbs 3002 32 URAI 3H 1.25" NPT 78 lbs 3003 33 URAI 3M 2" NPT 83 lbs 3006 36 URAI 3L 2.5" NPT 113 lbs 4002 42 URAI 4H 1.5" NPT 95 lbs 4005 45 URAI 4M 2.5" NPT 119 lbs 4007 47 URAI 4L 3" NPT 138 lbs 5003 53 URAI 5H 2.5" NPT 152 lbs 5006 56 URAI 5M 4" NPT 185 lbs 5009 59 URAI 5L 4" NPT 222 lbs 6005 65 URAI 6H 3" NPT 250 lbs 6008 68 URAI 6M 5" NPT 310 lbs 6015 615 URAI 6L 6" Flange 456 lbs 7006 76 URAI 7H 4" NPT 425 lbs 7011 711 URAI 7M 6" Flange 555 lbs 7018 718 URAI 7L 8" Flange 675 lbs

Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:

Type of Application
Atmospheric Air or Process Air without Liquids Present:	Process Gases Other than Air, or Any Liquid Injected Application:
24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.	18 months from date of shipment, or 12 months after initial startup date, whichever occurs first

• Competitor Plus Manual
• Competitor Plus Specification Sheet
• Competitor Plus Specification Sheet (Metric)
  
  
• Model 2002 Performance Curves
• Model 2004 Performance Curves
• Models 2002 2004 21B-21T Outline Drawings
• Models 2002 2004 21L-21R Outline Drawings
  
  
• Model 3002 Performance Curves
• Model 3003 Performance Curves
• Model 3003 3-Lobe Performance Curves
• Model 3006 Performance Curves
• Model 3006 3-Lobe Performance Curves
• Models 3002 3003 3006 21B-21T Outline Drawings
• Models 3002 3003 3006 21L-21R Outline Drawings
  
  
• Model 4002 Performance Curves
• Model 4005 Performance Curves
• Model 4005 3-Lobe Performance Curves
• Model 4007 Performance Curves
• Model 4007 3-Lobe Performance Curves
• Models 4002 4005 4007 21B-21T Outline Drawings
• Models 4002 4005 4007 21L-21R Outline Drawings
  
  
• Model 5003 Performance Curve
• Model 5006 Performance Curve
• Model 5006 3-Lobe Performance Curve
• Model 5009 Performance Curve
• Model 5009 3-Lobe Performance Curve
• Models 5003 5006 5009 21B-21T Outline Drawings
• Models 5003 5006 5009 21L-21R Outline Drawings
  
  
• Model 6005 Performance Curve
• Model 6008 Performance Curve
• Model 6015 Performance Curve
• Models 6005 6008 6015 21B-21T Outline Drawings
  
  
• Model 7006 Performance Curve
• Model 7011 Performance Curve
• Model 7018 Performance Curve
• Models 7007 7011 7015 21L-21R Outline Drawings
• Models 7007 7011 7018 21B-21T Outline Drawings
  
  
• Models 3003 3006 4005 4007 5006 5009 Competitor Plus 21N Outline Drawings