Model 1200 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 15 PSIG (1.03 bar g) pressure boost or 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g]water injected).
19/86 Series (Air Flow)
The 19 (horizontal flow) and 86 (vertical flow) series have wide application in pneumatic conveying, wastewater treatment and the general process industry where high pressure, high volume air is required. Seal areas are vented to atmosphere to relieve process pressure against the internal lip seals, and to provide oil-free air.
Specifications
Features
Applications
Warranty
Documents
Performance Specifications:
Flow range: 180 - 9300 CFM (305 - 15700 m³/h)
Pressure range: up to 20 PSIG (1.38 bar g)
Vacuum range: up to 15” Hg (-500 mbar g) dry vacuum (24” Hg [-810 mbar g] water injected)
Material Specifications:
Housing: Cast iron
End Plates: Cast iron
End Cover: Cast iron
Rotors: Ductile iron
Shafts: Ductile iron, cast integrally with rotors
Drive Shaft: SAE 4140 forged alloy steel
Gears: Heat treated alloy steel, helical cut
Bearings:
Gear end: Double row ball, both rotors
Drive End: Cylindrical roller on drive rotor
Seals:
19/86: Lip and labyrinth type on the rotor shafts;
lip seal on the drive shaft
55/82: Mechanical and labyrinth type on the rotor shafts;
lip seal on the drive shaft
66/69: Same as 55/82 plus mechanical sealing on the
drive shaft
Lubrication: Bearings are lubricated by an integral pressure
system including filter and oil to water heat
exchanger; gears are splash lubricated.
Helical Gearing
Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise.
Double Row Ball Bearings
For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands.
Rotors with Integral Shafts
Tuthill blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time.
Positive End Clearances
Eliminates the risk of shifting end clearances when installing or removing drive components.
Polished Sealing Surfaces
All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage.
Individually Tested
Every PD PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards.
Pulp/Paper Processing
Fluid Bed Combustion
Pneumatic Conveying
Fluidization/Agitation of Dense Powders
Mobile Vacuum Waste Removal
High-Performance Applications
Pressure Boosting
Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:
Type of Application
Atmospheric Air or Process Air without Liquids Present:
Process Gases Other than Air, or Any Liquid Injected Application:
24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.
18 months from date of shipment, or 12 months after initial startup date, whichever occurs first
